考虑滑流影响的埋入式进气道气动特性分析与流动控制研究

研究滑流对埋入式进气道性能的影响机理对于发动机的稳定性具有重要意义。针对某型涡桨发动机 滑油散热器进排气道系统,基于 CFD技术建立系统的螺旋桨滑流与滑油散热器内流一体化数值模拟方法,进 行考虑滑流影响的滑油散热系统埋入式进气道气动设计仿真分析;针对埋入式进气道由于吸入边界层低能气 流导致通过散热器流量低的问题,设计4组涡流发生器进行主动流动控制。结果表明:滑流使得进气道中的气 流偏离,难以形成稳定漩涡,容易发生流动分离;而合理设计的涡流发生器可以有效改善埋入式进气道内流场 特性,并使通过散热器的流量提高12%。     

Evolution of periodic orbits near the Lagrangian point L2

A study of the evolution of the periodic and the quasi-periodic orbits near the Lagrangian point L₂, which is located to the right of the smaller primary on the line joining the primaries and whose distance from the more massive primary is greater than the distance between the primaries, in the framework of restricted three-body problem for the Sun–Jupiter, Earth–Moon (relatively large mass ratio) and Saturn–Titan (relatively small mass ratio) systems is made. Two families of periodic orbits around the smaller primary are identified using the Poincaré surface of section method – family I (initially elliptical, gradually becomes egg-shaped with the increase in the Jacobi constant C and elongated towards the more massive primary) and family II (initially egg-shaped orbits elongated towards L₂ and gradually becomes elliptical with the increase in C). The family I in the Sun–Jupiter and Saturn–Titan systems contains two separatrix caused by third-order and fourth-order resonances, while the Earth–Moon system has only one separatrix which is caused by third-order resonances. Also in the Sun–Jupiter and the Saturn–Titan systems, family I merge with family II, around Jacobian constant 3.0393 and 3.0163, respectively, while in the Earth–Moon system, family II evolves separately from two different branches. The two branches merge at C = 3.184515. In the Earth–Moon system, the family II contains a separatrix due to third-order resonances which is absent in the other two systems.     

基于产学研模式的飞机机务维修实训平台建设

目的探索构建校内生产性实训基地;方法以飞机结构腐蚀与控制实训平台的建设为例;结果阐述校内实现以产学研相结合模式来进行实训平台建设;结论对其它机务维修专业课程的实训平台建设起到引导的作用。     

基于灰色补偿反步法的机动指令跟踪控制

基于三自由度飞行动力学模型和运动学模型,提出了一种带有灰色补偿的反步(Back-stepping)控制方法,以实现某些预定的战术机动动作。首先,将飞行动力学模型和运动学模型分解成3个轴方向的相对简单的子系统;然后,针对3个子系统采用反步法分别设计出模型中没有干扰时的控制律,并采用GM(0,N)预测模型对不确定部分的模型参数进行辨识,进一步根据估计出的参数设计灰色补偿控制律;最后,根据3个子系统设计出的控制律解算出同时满足3个子系统渐进稳定的控制输入,这样使得整个系统渐进稳定。仿真结果表明,GM(0,N)预测模型能精确预测不确定模型参数,该算法能够高效实现预定的战术机动动作。     

民用飞机技术出版物规范应用

技术出版物作为民用飞机产品的重要组成部分,用于指导运营人正确地操作和维护飞机.为了满足相关适航规章的要求和用户对于交互式电子技术手册日益增长的需求,实现手册全寿命周期管理,飞机制造商应在保证手册完整、正确、准确的基础上,进一步实现手册的标准化、规范化和结构化.本文对国际主流技术出版物规范的特点、规范的确定、应用方法和风险等进行了介绍和阐述.     

变推力液体火箭发动机中针栓喷注器研究综述

为总结变推力液体火箭发动机中针栓喷注器的研究成果和梳理未来的发展方向，本文综述了该领域的研究进展。首先介绍了针栓喷注器的基本概念和研究意义，然后从设计原理、工程研制、雾化特性和燃烧特性等方面介绍了针栓喷注器的研究历史和现状，最后展望了针栓喷注器的发展趋势及需要研究的一些科学问题。分析表明，液液针栓喷注器、气液针栓喷注器的雾化特性和燃烧特性都还需持续开展研究。雾化特性中特别需要关注的是雾化角、混合特性和下漏率，还要探索针栓喷注器在反压下的雾化特性。燃烧特性中需要深入研究温度分布、火焰结构和燃烧稳定性。     

Simulation Techniques for Cosmological Simulations

Modern cosmological observations allow us to study in great detail the evolution and history of the large scale structure hierarchy. The fundamental problem of accurate constraints on the cosmological parameters, within a given cosmological model, requires precise modelling of the observed structure. In this paper we briefly review the current most effective techniques of large scale structure simulations, emphasising both their advantages and shortcomings. Starting with basics of the direct N-body simulations appropriate to modelling cold dark matter evolution, we then discuss the direct-sum technique GRAPE, particle-mesh (PM) and hybrid methods, combining the PM and the tree algorithms. Simulations of baryonic matter in the Universe often use hydrodynamic codes based on both particle methods that discretise mass, and grid-based methods. We briefly describe Eulerian grid methods, and also some variants of Lagrangian smoothed particle hydrodynamics (SPH) methods.     

环境减灾-1A、1B卫星光学载荷在轨运行情况分析

环境减灾-1A、1B卫星于2008年9月6日发射升空,至2013年7月20日,2颗卫星的4台宽覆盖多光谱CCD相机、1台超光谱成像仪(HSI)和1台红外相机(IRS)已在轨稳定工作近5年,共获取超过61万景2级地面遥感图像数据。文章对在轨运行的光学载荷遥测参数进行了统计和分析,结果表明:DC/DC电压遥测变化量不超过5%,关键光机部位温度遥测变化量小于2.25℃,转动部件电压和电流遥测变化量小于1%,遥测参数均在设计范围内,显示光学载荷在轨稳定正常工作。最后,综合分析了光学载荷图像数据应用情况,分析表明:光学载荷图像数据具有较强的地物影像分类、提取和分辨能力,与国外同类卫星比较,水体识别符合度达到90%以上,旱情分级符合度大于66%,光谱分辨率达到5nm,积雪范围提取精度达到90%以上,在各类应用领域发挥了较大的效能。     

Integration of lessons from recent research for “Earth to Mars” life support systems

Development of reliable and robust strategies for long-term life support for planetary exploration must be built from real-time experimentation to verify and improve system components. Also critical is incorporating a range of viable options to handle potential short-term life system imbalances. This paper revisits some of the conceptual framework for a Mars base prototype which has been developed by the authors along with others previously advanced (“Mars on Earth^®”) in the light of three years of experimentation in the Laboratory Biosphere, further investigation of system alternatives and the advent of other innovative engineering and agri-ecosystem approaches. Several experiments with candidate space agriculture crops have demonstrated the higher productivity possible with elevated light levels and improved environmental controls. For example, crops of sweet potatoes exceeded original Mars base prototype projections by an average of 46% (53% for best crop) ultradwarf (Apogee) wheat by 9% (23% for best crop), pinto bean by 13% (31% for best crop). These production levels, although they may be increased with further optimization of lighting regimes, environmental parameters, crop density etc. offer evidence that a soil-based system can be as productive as the hydroponic systems which have dominated space life support scenarios and research. But soil also offers distinct advantages: the capability to be created on the Moon or Mars using in situ space resources, reduces long-term reliance on consumables and imported resources, and more readily recycling and incorporating crew and crop waste products. In addition, a living soil contains a complex microbial ecosystem which helps prevent the buildup of trace gases or compounds, and thus assist with air and water purification. The atmospheric dynamics of these crops were studied in the Laboratory Biosphere adding to the database necessary for managing the mixed stands of crops essential for supplying a nutritionally adequate diet in space. This paper explores some of the challenges of small bioregenerative life support: air-sealing and facility architecture/design, balance of short-term variations of carbon dioxide and oxygen through staggered plantings, options for additional atmospheric buffers and sinks, lighting/energy efficiency engineering, crop and waste product recycling approaches, and human factor considerations in the design and operation of a Mars base. An “Earth to Mars” project, forging the ability to live sustainably in space (as on Earth) requires continued research and testing of these components and integrated subsystems; and developing a step-by-step learning process.     

可展开式辐射器热控对航天器轨道调整的适应性分析

为提高航天器热控系统对轨道调整的适应能力，本文研究了与流体回路耦合的可展开式辐射器热控方案在不同轨道高度下的热控性能，分析了不同轨道高度时辐射器面临的热环境的影响，在不同轨道高度下比较了固定辐射器与可展开辐射器的热控特性。结果表明，随着辐射器展开角度的变化，辐射器吸收的空间热流随之发生变化，从而对热控系统的散热能力带来直接影响，调节辐射器的角度可以扩大其对外散热能力。在工程应用中，基于热控流体回路，通过调节可展开式辐射器的展开角度，可以有效提高航天器的轨道热适应能力。